This site is a static archive of Process Arts, an open online repository of arts learning resources that was active from 2009 - 2017

The loss wax process Introduction - Bronze casting - Part one

See video

PART 1 – The loss wax process Introduction - The loss wax process described by Chelsea college of art alumni Marco Chiandetti, supported by UAL foundry staff John Nicoll and Richard Elliott. Marco gives an in-depth overview his process prior to his final MA exhibition, following videos will show the process in-detail. Video by Chris Follows:

Full process - all Videos:

PART 2 – Runners and risers – http://process.arts.ac.uk/content/runners-and-risers-loss-wax-process-bronze-casting-part-two

PART 3 – 1st stage plaster – http://process.arts.ac.uk/content/1st-stage-plaster-loss-wax-process-bronze-casting-part-three

PART 4 – Fired plaster mould – http://process.arts.ac.uk/content/fired-plaster-mould-loss-wax-process-bronze-casting-part-four

PART 5 – Pit preparation – http://process.arts.ac.uk/content/pit-preparation-loss-wax-process-part-five

PART 6 – The pour – http://process.arts.ac.uk/content/pour-loss-wax-process-part-six

PART 7 – Removing bronze from plaster mould – http://process.arts.ac.uk/content/removing-bronze-plaster-mould-loss-wax-part-7

PART 8 – Marco Chiandetti talks about the finished piece – http://process.arts.ac.uk/content/marco-chiandetti-talks-about-finished-piece-loss-wax-process-part-8

No votes yet
6119 reads

Comments

Featured's picture

Bronze casting Introduction – The loss wax process described by Chelsea college of art alumni Marco Chiandetti, supported by UAL foundry staff John Nicoll and Richard Elliott. Marco gives an in-depth overview his process prior to his final MA

PART 1 – The loss wax process Introduction – http://process.arts.ac.uk/content/loss-wax-process-introduction-bronze-casting-part-one

PART 2 – Runners and risers – http://process.arts.ac.uk/content/runners-and-risers-loss-wax-process-bronze-casting-part-two

PART 3 – 1st stage plaster – http://process.arts.ac.uk/content/1st-stage-plaster-loss-wax-process-bronze-casting-part-three

PART 4 – Fired plaster mould – http://process.arts.ac.uk/content/fired-plaster-mould-loss-wax-process-bronze-casting-part-four

PART 5 – Pit preparation – http://process.arts.ac.uk/content/pit-preparation-loss-wax-process-part-five

PART 6 – The pour – http://process.arts.ac.uk/content/pour-loss-wax-process-part-six

PART 7 – Removing bronze from plaster mould – http://process.arts.ac.uk/content/removing-bronze-plaster-mould-loss-wax-part-7

PART 8 – Marco Chiandetti talks about the finished piece – http://process.arts.ac.uk/content/marco-chiandetti-talks-about-finished-piece-loss-wax-process-part-8

Creative Commons None (All Rights Reserved)
To the extent possible under law, all copyright and related or neighboring rights to this Work, The loss wax process Introduction - Bronze casting - Part one , by Featured are Reserved.